May. 20, 2024
PVDF (Polyvinylidene Fluoride) coatings are known for their excellent resistance to weathering, chemical degradation, and UV radiation, making them a popular choice for protecting metal surfaces in architectural applications.
Polyvinylidene Difluoride (PVDF)
/noun: the fluoropolymer resin used in exterior metal coatings for durability and resistance to weathering
If you are looking for more details, kindly visit china pvdf coated aluminium coil manufacturer.
Originally introduced to the market in 1965, 70 percent polyvinylidene difluoride (PVDF) coatings have steadily become one of the most popular and respected coil and extrusion coatings available on the market. Over the last half-century, no other architectural product has more decisively withstood the test of time than 70 percent PVDF resin-based coatings. Continuous technological improvements have contributed to the longevity of PVDF, resulting in additional formulations and practices for applications that have distinct requirements.
PVDF coatings are renowned for their durability, providing long-term protection for metal surfaces against weathering, UV rays, and corrosion. This longevity ensures that the structures maintain their aesthetic appeal and structural integrity over time.
One of the key benefits of PVDF coatings is their excellent color retention. Metals coated with PVDF maintain their vibrant colors longer than those coated with other types of paints, even when exposed to harsh environmental conditions.
PVDF coatings offer impressive flexibility, which helps prevent cracking and peeling during the expansion and contraction of metal surfaces due to temperature fluctuations. This trait makes PVDF an excellent choice for various architectural applications.
Because of their excellent weatherability and aesthetic versatility, PVDF coatings are widely used on building facades. Whether it is a modern commercial building or a residential structure, PVDF ensures both beauty and durability.
PVDF coatings are also prevalent in roofing systems, providing excellent protection against environmental elements such as rain, sunlight, and industrial pollutants. This contributes to the longevity of the roof and helps in maintaining its appearance.
Industrial structures benefit from PVDF coatings due to their resistance to chemicals and harsh environmental conditions. These coatings reduce the risk of corrosion, thus extending the lifespan of industrial buildings and components.
Home » Aluminum Coil
Aluminum coil is a rolled product, produced in a coiled form of a continuous strip, and has an inner diameter and outer diameter. ID from 50 mm to 1000mm. Aluminium alloy grade including 1xxx, 2xxx, 3xxx, 4xxx, 5xxx, 6xxx, 7xxx, 8xxx. But the most common is 1050, 3003, 6061, and 5251 aluminum coil. Thickness from 0.045-80mm, width from 60-2650mm. Common widths of the aluminum coil are 800mm,1000mm, 1250mm,1450mm, and 1500mm.
Multiple industries rely on aluminum coils for a variety of applications, such as automotive, construction, heat transfer, pharmaceutical, electrical, and food industry. Compared to other materials, aluminum is a far superior material in many instances. The aluminum coil can be supplied with a standard mill finish or it can be brushed, checkered, color coated, satin-finished, and anodized. Aluminum sheets or aluminum foil can be cut into coils as per the client’s requirements.
CHAL Aluminum Corporation is a fully integrated aluminum manufacturer and supplier that provides all kinds of aluminum products and technical solutions. We are committed to being the leading supplier of aluminum plate, cast tooling aluminum plate, aluminum sheet (clad or bare), aluminum foil (clad or bare), aluminum strip (slit coil), aluminum circle, and aluminum coil. As for CHAL aluminum coil, we supply aluminum sheet coil and aluminum foil coil in a wide variety of alloys and thicknesses.
Product NameAluminium CoilAlloy/Grade1050, 1060, 1070, 1100, 1200, 2024, 3003, 3104, 3105, 3005, 5052, 5754, 5083, 5251, 6061, 6063, 6082, 7075, 8011, 8079, 8021TemperF, O, HMOQ5T for customized, 2T for stockThickness0.014mm-20mmPackagingWooden Pallet for Strip & CoilWidth60mm-2650mmDelivery15-25days for productionMaterialCC & DC routeID76/89/152/300/405/508/790/800mmTypeStrip, CoilOriginChinaStandardGB/T, ASTM, ENLoading PortAny port of China, Shanghai & Ningbo & QingdaoSurfaceMill Finish, Anodized, Color coated PE Film Available Delivery Methods
Alloy SeriesTypical AlloyIntroduction1000 Series1050 1060 1070 1100Industrial Pure Aluminum. Of all series, the 1000 series belongs to the series with the largest aluminum content. The purity can reach over 99.00%.2000 Series2024(2A12), LY12, LY11, 2A11, 2A14(LD10), 2017, 2A17Aluminum-copper Alloys. 2000 series is characterized by high hardness, in which the content of copper is the highest, about 3-5%.3000 Series3A21, 3003, 3103, 3004, 3005, 3105Aluminum-manganese Alloys. 3000 series aluminum sheet is mainly composed of manganese. The manganese content ranges from 1.0% to 1.5%. It is a series with a better rust-proof function.4000 Series4A03, 4A11, 4A13, 4A17, 4004, 4032, 4043, 4043A, 4047, 4047AAl-Si Alloys. Usually, the silicon content is between 4.5 and 6.0%. It belongs to building materials, mechanical parts, forging materials, welding materials, low melting points, and good corrosion resistance.5000 Series5052, 5083, 5754, 5005, 5086, 5182Al-Mg Alloys. 5000 series aluminum alloy belongs to the more commonly used alloy aluminum series, the main element is magnesium, and the magnesium content is between 3-5%. The main characteristics are low density, high tensile strength, and high elongation.6000 Series6063, 6061, 6060, 6351, 6070, 6181, 6082, 6A02Aluminum Magnesium Silicon Alloys. The representative 6061 mainly contains magnesium and silicon, so it concentrates on the advantages of the 4000 series and 5000 Series. 6061 is a cold-treated aluminum forging product, which is suitable for applications requiring high corrosion resistance and oxidation resistance.7000 Series7075, 7A04, 7A09, 7A52, 7A05Aluminum, Zinc, Magnesium, and Copper Alloys. The representative 7075 mainly contains zinc. It is a heat-treatable alloy, belongs to super-hard aluminum alloy, and has good wear resistance. 7075 aluminum plate is stress-relieved and will not deform or warp after processing.
The melting point of aluminum is 660 degrees, and the general temperature does not reach its melting point.
Because of its tight surface oxide film, it has strong adhesion, oxidation resistance, acid resistance, alkali resistance, corrosion resistance, decay resistance, and UV resistance.
Soft and colorful, avoiding the individual chromatic aberration of traditional spraying, no matter how large the ceiling, its color, and color are consistent, lasting, and new.
Rigid and tough combination, free to cut, slit, arc, balance, drilling, joint fixation, and edge compression molding.
Not easy to turn yellow, using chromium-free treatment liquid to make up for the defects of easy discoloration of the laminating board; the roller paint contains active chemical molecules, which promote the formation of a protective layer on the surface of the material. Active chemical molecules are stable and easy to recycle, meeting environmental requirements.
The aluminum coil can be used for a wide range of applications from truck bodies in the transport industry to clad aluminum coil for heat transfer and insulation material for the building industry.
Aluminum Ingot/Master Alloys — Melting Furnace — Holding Furnace — Slab — Hot Rolling — Cold Rolling — Slitting machine (vertical cutting to narrow width) — Annealing Furnace (unwinding) — Final Inspection — Packing — Delivery
For more information, please visit wood pattern coil.
When we choose an aluminum coil, it is important to note that choosing the right alloy for the aluminum coil is directly dependent on the properties and the specific using scenario. Before you purchase aluminum coil, it is vital to pay attention to the flowing properties:
The fluorocarbon coating is a coating of PVDF resin mainly referring to a vinylidene fluoride homopolymer or a copolymer of vinylidene fluoride and other small amounts of the fluorine-containing vinyl monomer. A fluorine/carbon bond combines the chemical structure of the fluoric acid base. This chemical structural stability and firmness make the physical properties of fluorocarbon coatings different from conventional coatings. In addition to the abrasion resistance in terms of mechanical properties, impact resistance has excellent performance, especially in harsh weather and environment, showing long-lasting resistance to fading and UV. After the high-temperature barbecue is formed into a film, the molecular structure in the coating is tight and has excellent weather resistance. It is especially suitable for the decoration and display of indoor, and outdoor decorations, commercial chains, exhibition advertisements, etc.
The polyester coating formed by multiple baking of the surface of the aluminum plate can create a solid film adhered to have a protective decorative property. It is an anti-UV ultraviolet coating. The polyester resin uses a polymer containing an ester bond in the main chain as a monomer, and an alkyd resin is added. The ultraviolet absorber can be divided into a matt and a high-gloss series according to the gloss. It can give rich color to color aluminum products, has good shine and smoothness, as well as superior texture and hand feeling, and can also add layering and three-dimensionality. It can protect objects from ultraviolet radiation, wind, rain, frost, and snow; the coating can protect due to temperature differences, freeze-thaw cycles, corrosive gases, and microorganisms. Especially suitable for interior decoration and advertising panels.
CHAL Aluminium Corporation is a fully integrated aluminum company that provides all kinds of aluminum products and technical solutions. We are committed to being the leading supplier of aluminum plates, aluminum sheets, aluminum strips, aluminum foil, aluminum circles, aluminum heat transfer material, aluminum profiles, precision aluminum tubes, aluminum machining parts, and stamping parts. CHAL Aluminium Corporation is one of the biggest aluminum manufacturers in China. We have a large-scale plant, first-rate facilities, sufficient production capacity, and the fullest range of products. We have 6 manufacturing bases in five provinces. The headquarters base is located in Chongqing Xipeng aluminum industry town. We have 5 R&D Centers, more than 4000 employees, including 600 R&D staff, and more than 200 patents, Annual R&D investment exceeds 220,000,000 RMB and a production capacity of 320,000 tons.
To ensure quality, CHAL makes big investments to purchase advanced equipment from abroad, including a melting-holding furnace, casting machine, pusher-type heating furnace, 1+1+3 hot rolling mill, 1+5 hot rolling mill, stretching machine, roller hearth quenching furnace, and aging furnace, 3-stand tandem cold rolling mill, 2-stand tandem cold rolling mill and single stand cold rolling mill, intelligent high bay storage, tension leveling line, trimming line, air-floating type quenching line, packaging line, and other finishing equipment.
2000/Tons Per Month
Our products are packed and labeled according to the regulations and customers’ requests. Great care is taken to avoid any damage that might be caused during storage or transportation. The standard export packaging, plastic film, or craft paper is covered. A wooden case or wooden pallet is adopted to protect products from damage during delivery. In addition, clear labels are tagged on the outside of the packages for easy identification of the products and quality information.
A: Generally, the trial order will be accepted. The MOQ can be confirmed according to the different products.
A: Yes. A variety of product sizes, qualities, and quantities can be customized according to your need.
A: Yes, we could offer the sample free of charge; you only need to pay the cost of freight.
A: Within 20-25 days after receiving the deposit.
A: FOB will be accepted.
A: 30%TT in advance and the balance against of copy of B/L.
The company is the world’s best color coated aluminum coil supplier. We are your one-stop shop for all needs.
If you are interested in sending in a Guest Blogger Submission,welcome to write for us!
All Comments ( 0 )