Sawdust Briquette Machine | Biomass Briquette Press

Sawdust briquette machine is a screw-type extrusion press for making briquettes as fuel from biomass materials. It is one of the main machines in making bio-charcoal briquettes. It is also called a biomass briquette press or wood charcoal machine.

For more information, please visit our website.

Advantages of sawdust briquettes

1. Wood sawdust briquettes can be used as fuel for burning directly. Compared with natural wood, it has a higher density and heating value.
2. The sawdust briquette machine can use residual wood and agro-waste to produce briquettes, and these wood briquettes can be carbonized into charcoal. It changes the traditional way of making charcoal from lump wood, helping reduce tree felling.
3. Compared with natural timber charcoal, sawdust briquette charcoal has a higher heating value and longer burning time.

Biomass Materials for making briquettes

Biomass materials for producing briquettes can be wood sawdust, rice husk, tree branches, coconut shell, coffee grounds, bagasse, peanut shell, bamboo, etc. One thing in common among these materials is that they all contain a certain amount of lignin. Lignin is an important ingredient for briquette forming, it can reform the shape in the condition of high pressure and high temperature.

Required size and humidity of sawdust for making briquettes

The size and moisture of materials are important for making high-quality wood briquettes. Regarding the size of the material, it needs to be less than 5mm, and the moisture content should be less than 12%. To make the materials meet these requirements, you can choose a wood crusher and sawdust dryer to process the raw materials.

How to make sawdust briquettes

First, set the temperature of the sawdust briquette machine to 280&#;. After the temperature rises to 280&#;, begin to feed materials into the sawdust briquette machine. Sawdust is pushed by the rotating screw forward to the end of the mold. Under high temperatures and high pressure, sawdust is forming into briquettes and is expelled from the mold. The briquette producer needs to adjust the temperature according to the quality of the briquettes until to get the ideal wood briquettes.

You can read the below operation manual of the sawdust briquette machine for more details.

Operation Manual Of Wood Briquette Machine

Operation Manual of Wood Briquette Machine introduces the design, operation, maintain and fault diagnosis.

Read More

How the sawdust briquette machine work

For privacy reasons YouTube needs your permission to be loaded.

The shape and size of sawdust briquettes

Tiantai are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.

The shape and size of briquettes are determined by the mold barrel. Diameter of briquettes is 50mm. All of the briquettes made by the sawdust briquette machine are hollow. 

Consumable parts of sawdust briquette machine

Spiral propeller

Driven by the pulley, the spiral propelling shaft continuously transports the material to the front outlet, and gradually increases the pressure on the material to extrude the material into shaped briquettes. Therefore, the front section of the propeller has the greatest friction with the material and is also the most susceptible to wear. Our screw propeller shaft is made of Cr40 steel, which has a good balance between the toughness and wear resistance of the propeller shaft. The front section of the spiral is overlayed with tungsten carbide electrodes to further increase wear resistance.

Heating elements

As mentioned earlier, sawdust is rich in lignin. Lignin is sticky under high-temperature conditions and helps to shape the sawdust. The heating temperature setting varies according to the material. If the raw material is wood sawdust, the temperature is generally set to 280° first and then adjusted to the optimal temperature according to the quality of the sawdust briquettes.

Molding sleeve

Molding sleeves are available in two shapes, square and hexagonal. The most popular size now is 4.8-5cm in diameter. Because after a large number of tests and production practices, it has been proved that the sawdust briquettes produced by 4.8-5cm molding sleeves have the best quality.

Wood Briquette Machine Spare Parts-screw, Heating Ring, Mold

Wood briquette machine spare parts include screw propeller, heating ring and mould sleeve. They are also wearing parts of the sawdust briquette machine.

Read More

Technical parameter of sawdust briquette machine

Briquette presses from WEIMA convert valuable waste into compact briquettes that can be burned to subsidize your operation&#;s energy costs or sold for profit.

The wood briquetting process uses no binders or glues&#; the material you put into it is what comes out of it. The difference? The amount of space it takes up! Learn more about space savings, storage, haul-away alternatives and other options for this valuable byproduct.

About wood briquetting

If you are looking for more details, kindly visit Sawdust Briquetting Machine.