Key Questions to Ask When Ordering 4mm mirror glass price

4mm mirror extras

Northglass contains other products and information you need, so please check it out.

LOW MODULUS NEUTRAL CURE SILICON -

If using mirrors or glass in wet conditions or areas where aggressive cleaning products are used such as bathrooms or kitchens, you should place a thin protective seal around the product to create a waterproof membrane to protect the edges of the mirror from those products that could cause harm over time. The sealant must be low modulus neutral cure to avoid potential damage to the mirror itself.

The protective seal does not need to be a thick bead, a few mm is sufficient, and the product we sell is clear. There are alternatives in the market that offer the same specifications but are in a range of colors. The key is to ensure it clearly states on the tube LOW MODULUS NEUTRAL CURE.

Generally we recommend our highest specification mirrors for such applications as bathrooms and kitchen wet areas and this is 6mm low iron copper free lead free mirror. With the removal of these metals the chances of oxidisation and rust over time is greatly reduced.

MIRROR ADHESIVE - Solution can be used in 4mm/ 5mm / 6mm

WITH NO SAFETY BACKING

If buying your adhesive elsewhere please ensure that it states MIRROR ADHESIVE on the product you are using. It is vital you check this as people have purchased aggressive adhesives such as "No more nails" in error and this actually eats away the mirror and protective paint backing.

IF IT DOES NOT STATE MIRROR ADHESIVE ON THE PRODUCT DO NOT USE IT REGARDLESS OF THE ADVICE YOU ARE BEING GIVEN!

If fitting with adhesive, the glue acts as a safety film if applied to the entire back surface of the mirror and if the mirror were to break, the pieces will stay stuck to the wall. Please be advised that if using adhesive, it is very strong and you will not be able to remove the mirror if required without breaking it and then scraping it off the wall.

YOU MUST BOND YOUR MIRRORS TO A NON POROUS SURFACE E.G. MDF IS POROUS SO WOULD NEED TO BE EITHER PAINTED OR PRIMED FIRST BEFORE ATTEMPTING YOUR MIRROR INSTALLATION.

For more information, please visit 4mm mirror glass price.

It is probably the strongest selection, so good for schools or areas with young children.

Each mirror glue tube we supply is enough to hang 33kg safely - the weights of all our products are displayed during the ordering process.

Visit our how to guide section for access to a downloadable PDF on how to hang with adhesive.

PROS

- Very easy to install

- Very strong and safe solution

- Cost effective

CONS

- Mirrors cannot be moved in the future

- Difficult to replace broken panels as it is difficult to scrape broken mirrors off a wall safely and cleanly without closing the area off and there is a small chance you could damage a mirror positioned next to it.

Order Procedure

Quick and easy! add your required item(s) into the cart and place an order. No credit card required. After your order soon our salesperson will contact you to confirm your order and will discuss delivery options & further details with you.

For more why pdlc glassinformation, please contact us. We will provide professional answers.