Choosing the Right Industrial Press

In order to choose the right type of press, you first need to know if the machine will be used for:

tpypress are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.

You will also need to have a fairly accurate idea of the finished dimensions of the workpiece to be formed, and the dimensions of the parts to be handled for punching or riveting, in particular to be able to correctly choose the dimensions of the worktable and the press opening height.

You will then need to define the tonnage of the machine you require. This will depend on the type of material you will be working with, its thickness and the type of stamping to be performed (for example, the stamping depth or the cutting perimeter). The tonnage of the machine is usually expressed in kilonewtons (kN). There are presses from 5 kN (0.51 metric tons) up to 500,000 kN (50,000 metric tons).

Are you interested in learning more about automated hydraulic press? Contact us today to secure an expert consultation!

Production requirements are also important to consider, whether they are unitary or small or large series. For one-off needs or small series, you might be interested in manual, mechanical or hydraulic presses, or even electric presses which also exist in portable models. For mass production, it is essential to know whether you need single striking or a repeated striking. In the latter case, you can consider transfer presses that allow you to carry out consecutive striking in a fully automatic manner.

All these criteria will allow you to choose the most suitable technology for your installation, whether it be hydraulic, mechanical or pneumatic.

I know everybody wants new toys and I&#;m no different, if I could afford it I&#;d have two of everything just incase one broke. So I think it depends on how much you will use it. If you will use it alot then spend the money and get the good one, no matter what the wife says. BUT IF NOT? heres what Ido, I go to the chevy dealer I used to work at and use theres, it&#;s a pain having to drive there with what your going to press but I don&#;t need to do any pressing very often so it works for me. You might have a small shop close to your house that might press something for you for a couple of bucks. If you only need a press once a year just think of the room you&#;ll save in your shop. On second thought, what fun is that. Go buy the good one from otc.

If you are looking for more details, kindly visit Hydraulic press industry uses.