Basics, Types and Benefits of Electric Standing Desk

Converting a Regular Desk into a Standing Desk

FreErgo are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.

Turn your desk into a standing desk! Well, that is not very difficult with the right set of components and accessories, of course with the right knowledge. Progressive Desk, you get an array of options for accessory sets and the later part, read along.

Compatible accessories are added to the desk set-up to enhance the functionalities and ergonomic features of your adjustable standing desk and enable the transformation. For example, a corner standing desk is designed for it to fit into the corner of rooms that have the appropriate space for it. However, if space is an issue, you can opt for a compact standing desk as opposed to a large standing desk through choosing smaller sized tabletops or standing desk types.

Normally, converting a regular standing desk into a standing desk is easier done than said. With the right set of accessories, such as riser frames, mechanisms, and tools you get the desk suitable to your height, comfort, and needs. The converting methods vary, depending on the type of accessory you choose.

Any standing desk is composed of two primary body components:

Mix and match for both these with the support of the accessories and products, one can easily build their DIY adjustable standing desks of compact and large sizes. While the list of accessories one can imagine for convertible standing desks, the list below shows an inclusive option one might need for comfortably converting the home or office standing desks.

Setting Your Desk&#;s Height

To figure out what standing desk height is good for you, start with measurements. The distance from the bottom of your elbows positioned at a 90-degree angle to the floor is the basic dimension you should go by. There is no need to overdo it with minute precision of the measuring process since positioning your elbows a little lower will do you no harm. But make sure the elbow angle is not less than 90 degrees, in which case your wrists, shoulders, and elbow joints will experience an unnecessary strain.

Once you have determined the best height for you &#; both sitting and standing &#; either make note of the figure on your remotes interface (if it has a digitized screen) or if you have a memory positioning remote, save these heights.

Another factor to be taken into consideration is the footwear you are going to have on while working at your desk. While it may seem trivial, this does make an impact! Do your research and if you are going to be standing for the majority of the day, choose footwear with good support and comfort. The adjustment process is not over with the desk height setting. The monitor position also needs to be taken into consideration.

Monitor Adjustment Guidelines

When adjusting your monitor, you should take care to take into account the following four criteria:

Vertical Positioning

The arrangement of your monitor stand on an adjustable height computer desk is quite easy to regulate. You can fine-tune the desktop stands to your desired height or also alter your converter height level. There is a science behind choosing the right height of your monitor. As they claim, working at the computer we mostly look at the upper left part of the screen. So position your monitor so that your eyes are level with the top fourth (or third) of it.

In case it stands higher, you have all chances of developing the tension of neck, shoulders, and back muscles since your head will be tilted up too much. And it is also a cause for extra eye strain.

Horizontal Positioning (aka Centering)

The monitor must be straight before your face. Placing it askance will result in the need for twisting your neck to look at it. Unless you are a manager communicating with customers across your desk (and the screen before your face will hinder your responsibilities) you should avoid such an awkward arrangement likely to result in neck and shoulder stiffness.

A good option in this respect is to acquire a swivel arm to place the monitor on so that you could adjust its position according to your immediate needs and even share the screen with your colleagues working next to you.

Tilting

Contact us to discuss your requirements of adjustable height electric computer desk. Our experienced sales team can help you identify the options that best suit your needs.

A typical backward tilt should be between 10° and 20°. The advised angle is achieved by moving the monitor base closer to the user than its upper part.

However, in case you wear bifocals the most comfortable angle will be between 30°&#;and &#;45°. However, tilting the monitor too far back will make it capture and reflect the lamplight over your head, so you will have to scale down the tilt otherwise your glasses will not help you much to see the screen better anyway.

Screen Distance

This parameter is largely determined by the comfortable distance from the eyes to the screen. Here &#;comfortable&#; means not too close to create a blurred image and make you tilt back your head and not too far when you can&#;t make out the picture on the screen and have to strain your eyes (or try to move the head closer to the monitor). Normally, such a distance equals 24 inches (61 centimeters) with 4 inches as a plus-or-minus margin. If you have no wish to fool around with a measuring tape just place the monitor at a stretched arm&#;s length and get done with all the bother.

Analyzing the Alternatives: Standing Desk Convertors

Standing desk converters are a separate accessory that rise your laptop or monitor. They are adjustable units for your laptop or desktop that can be conveniently placed on the top of standing or regular desks. They are the perfect alternatives to transform a regular desk into a standing desk without making any permanent changes to the existing desk structure and/or the setup. To make informed decisions into buying a standing desk converter factors such as computer size, the existing desk's tabletop surface area, space availability, and the cost.

An adjustable stand-up desk can have two types of mechanisms to lift or lower it, allowing you to opt for either a mechanical or a motorized standing desk. If you choose the former, this is an extremely manual process and you will have to operate devices such as crank lifts to make even the slightest adjustments. While this may be considered a &#;budget solution&#;, it is an outdated and tedious mechanism.

To analyze weigh its suitability over the actual standing desk set-ups, it won&#;t be an exaggeration to say that there are more cons than pros.

Following are some prominent reasons why a standing desk convertor set-up or an adjustable unit is NOT just as perfect:

• Shrinking space availability and losing easy access to native sit-stand desktops

• Convertors are predominantly mechanical devices which do not have as pleasing aesthetics and noisy

• It appears that standing desk converters are a cost-effective solution but they do not last longer as compared to the investment they demand

• A mechanical standing desk convertor impacts the weight carried on it; so if you are planning to have multiple computers for your office, a mechanical standing desk converter is not very good.

On the other hand, automation is becoming more and more common and in turn, more affordable. Many see motorized standing desks as investments &#; and worthwhile investments at that! The simple push of a button puts your desk into motion through the use of electric linear actuators. These keystones of motion do the work for you, and with memory-positioning capabilities on many of our remotes, you really can just push one button to reach your preset desired height.

As far as the cost factor goes, an electric standing desk set-up is affordable and worth the money. At Progressive Desk, one can easily find a decent electric standing desk set-up costing around $500 with customizable options in Solo Ryzer standing desk. Alternatively, a larger electric standing desk with three leg setup, Corner Ryzer, can be found around $900 offering more desk space perfect applicable for home options.

Also, a standing desk offers a more permanent solution without vibrations during operations which is very difficult to achieve with adjustable units used as desk converters.

Making a Choice that Suits Your Need and Growing Technology

If you are an active person eager for new ideas, looking for ways to promote a healthy lifestyle, or simply want a more convenient way to work, a sit standing desk will be an excellent solution ticking all the boxes! Adjustable standing desks are designed to move with you, letting you change up your day and get much-needed movement and versatility as you work!

Progressive Desk standing desks are high-quality, state-of-the-art desks that have guaranteed quality and durability &#; this is reflected in their 8-year warranty! We keep up with the rising technology and offer you motorized standing desk options for your ease and ergonomics. Not only will these desks boost your productivity and provide health benefits, but they are also built to last.

Drop us a line today for more details on our standing desk options and we guide you through your decision making.

If you want to learn more, please visit our website best electric height adjustable standing desk.