Advantages of polyurethane outsoles - Imenpol blog

Comparison of different kinds of shoe soles with PU soles

Click here to get more.

• Rubber sole vs. PU sole

Rubber soles are still heavily used in the footwear industry. It is therefore apparent that it cannot be entirely replaced by the PU sole. According to statistics, about 30% of all shoe soles in the world&#;s shoe production are made of rubber. This material is most often used in the production of special footwear soles, it is slip-resistant, durable, frost-resistant.

PU soles are lighter but are less slip-resistant than rubber soles. Although the PU sole is durable, it cannot be compared with the durability of a rubber sole. But the drawback is its heavier than PU and TPU and less flexible. Also, rubber outsole is sturdy with the temperature resistant ranged from -30 to 300°C.

• EVA sole vs. PU sole

EVA belongs to polyolefins; it is obtained as a result of co polymerization of ethylene and vinyl acetate monomer. The vinyl acetate content determines the mechanical properties of the copolymer, as well as its type (elastomer or thermoplastic). EVA with 10-50% vinyl acetate content is most often used. At high content of vinyl ethylene vinyl acetate, it is highly resistant to oils, solvents, ozone and high temperature. Low-acetate copolymers have properties similar to those of low-density polyethylene. In addition, the properties of ethylene vinyl acetate copolymers depend on the formation of side chains and molecular weight.

The EVA sole is less resistant to abrasion, and cannot withstand long term compression as PU. It is also easier to clean a polyurethane sole than an EVA. In other words, over time, EVA soles lose their cushioning properties. This is due to the fact that the pore walls are destroyed, and the entire mass of EVA becomes flatter and less elastic.

• PVC sole vs PU sole

PVC is a thermoplastic material usually used to produce rubber boots. PVC shoe soles are durable, resistant to water and chemicals, just like PU. But, unlike the polyurethane sole, the PVC sole has poor resistance to slip. They&#;re rigid and aren&#;t breathable. Also good in cold resistant from -5 to -20°C but not high temperature, maximum at 100°C.

To improve the elastic properties of soles, plasticizers such as acid esters (phthalic, sebacic and adipic) are introduced into the polymers.  To increase the resistance to external influences, stabilizers (barium, cadmium and other fatty acid salts) are introduced into the composition, as well as dyes and other ingredients change the properties of the polymer. Over time, plasticizers can begin to evaporate from the material, which can lead to a loss of elasticity, the appearance of cracks, and a decrease in frost resistance.

PU or TPU soles

In most of their applications, polyurethane polymers have proved more cost-effective than alternative natural and synthetic materials. The cost per ton of basic urethane polymer is usually higher than the competing thermoplastic or conventional material, but a combination of density reduction by foaming and better performance in use very often secures the advantage for polyurethanes.

TPU is the abbreviation for thermoplastic polyurethane, it can be prepared in different colors and glossiness. Moreover, formulations of TPU sole can be modified and the modification of the properties of urethane thermoplastic elastomers can be carried out by combining them with other polymer materials: chloroprene rubber, copolymers of acrylonitrile with vinylidene chloride, vinyl chloride with vinylidene chloride, butadiene with acrylonitrile, phenol formaldehyde, and other polymers.

Sole compositions based on TPU are divided into non-porous and porous, standard and with increased mechanical properties, elastic and rigid. Depending on the purpose of the shoe and the application of the compositions in the details of the bottom, materials based on TPU are produced for the outer layers of the soles, forming the soles entirely.

The advantages of the TPU soles are the soles with a deep tread, which provide excellent grip on the surface. Also, the advantages of TPU are high wear resistance and resistance to deformation, including cuts and punctures.