200SV-SP Vertical Slurry Pumps for Waste Water and Sludge

Oct 21, 2021

Click here to get more.

Tobee® 200SV-SP Vertical Slurry Pumps x 3 units with 6 sets slurry pump spares head to a Petroleum storage facility in Africa. These 200SV-SP Vertical Sump Slurry Pumps equipped with 45kw Explosion-Proof Motors, and used for Waste Water and Sludge, operating at 400m3/h and head 16m, The submerged depth extends to 2.6m.

The SP/SPR Vertical Cantilever Sump Pumps are vertical spindle slurry pumps designed to handle corrosive, coarse particles, and highly concentrated slurries. They can function effectively without a shaft gland or gland water, and the shaft length can be tailored to the liquid level depth.

The SP/SPR Vertical Slurry Pump is designed with a vertical inlet facing downward and an upward-facing outlet. The pump consists of a lower filter platform, pump body, impeller, shaft, guard plate, and bracket. Supported by bearings at the upper section, the pump is submersible and does not require a shaft seal. Whether employing a belt drive (BD) or direct drive (CD), the immersion depth can be adjusted to the user’s requirements.

Design features:
1. Vertical sump pumps are vertical, centrifugal slurry pumps submerged in sump to work.
2. They are designed for delivering abrasive, large particle and high density slurries.
3. These pumps have no need of any shaft seal and sealing water.
4. They can also be operated normally for insufficient suction duties.
5. Wet parts of type SP metal vertical slurry pump are made of abrasion-resistant metal.
6. All parts of type SP(R) rubber lined vertical slurry pump immersed in liquid are lined with rubber outer liner. They are suited
7. To transport non-edge angle abrasive slurry.

200SV-SP Vertical Slurry Pump Loading Photos:

For more information, please visit SUNBO PUMP.

Typical Applications:
1. Sump drainage washdown
2. Floor drainage
3. Mill sumps
4. Carbon transfer
5. Monitoring
6. Magnetite mixing

Technical dept.
Hebei Tobee Pump Co., Limited

AlphaFlo® V series metal or rubber lined centrifugal sump pumps are available in most popular sizes to suit common sump depths. The shaft length depends on the size of the pump:

For V40 ranges from 600 to 1800mm

For V150 ranges from 1500m to 2100mm

For V200, the spindle is available in 1.5m, 1.8m, 2.1m, and 2.4m lengths.

If you are looking for more details, kindly visit warman vertical slurry pump.