Apr. 29, 2024
Metal studs are an excellent alternative to wood framing and can last for decades with minimal maintenance. Metal stud framing generally costs between $2 and $5 per square foot.
If you want to learn more, please visit our website.
Recently, the metal stud price has been lower than the same size wood stud, making metal framing a cost-effective choice for your project. When metal studs are used in load-bearing applications, they can be stronger than wood framing, and they are available in various sizes and thicknesses to suit your specific project needs. This article will discuss the cost advantages of using steel studs rather than wood.
Get Your Estimate From a Professional Home Builder
Match with an expert to help you with your new home.
Metal stud framing is the use of cold-formed steel components to build interior and exterior walls. A stud and a track are the two main elements of metal stud framing. In load-bearing walls and structural applications, such as exterior walls, heavier gauge metal studs are used. Lighter gauge metal studs are utilized in non-load-bearing applications.
Metal studs are framed in the same way as wood studs. They come in a variety of sizes, much like wooden studs. Most metal studs are mechanically fastened with screws. Deflection connections can be utilized where earthquake, tornado, and hurricane activity is an issue. These connections prevent the flexing of the roof above the framed wall to transfer the twisting stress to the framing below, in a seismic event. To strengthen connections, stiffener plates are frequently used around openings.
In addition to cost, there are other advantages to using metal studs in the construction process.
Metal studs can be cut with a hacksaw or metal shears and do not require the use of a saw blade. However, if you are using a miter saw or chop saw, you can cut 10 or more simultaneously. Even without electricity, you can cut the metal with shears and attach them with a cordless drill.
In addition, metal framing does not split like wood, so there is no need for pre-drilling pilot holes. Metal framing does not warp, so it does not require any additional measures to ensure the frame remains square.
CanvaMetal framing does not require each stud to be cut to the exact length. They can still be attached to the metal track with a screw, even if they are a little short. This also saves time, as you can take a general measurement of the length needed along the wall and cut them all to the same size. In the case of a remodel, this is a big convenience.
Metal Studs are lighter than wood. On average, cold-formed framing studs are 10% lighter than wood. This is based on dry weight. If rain has soaked the wood, the metal stud will weigh the same, but the wood can double in weight.
When you go to the lumber yard to get wood studs, you quickly discover that no two are identical. Many of them are twisted or gouged, so you must sift through the inventory to find straight pieces. After obtaining your straight studs, the next stage is keeping them straight by storing them in a dry flat location until they’re needed. Installing wood studs requires a lot of effort to remove and replace. With metal, it’s much easier; unscrew the old and screw in the new.
Wusheng Hardware are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.
Suggested reading:In the past, wood was the least expensive framing material available to professional contractors. It was readily available around the country, and the quality was good. Recently, all that has changed. Supply chain issues have made wood scarce, and when it can be found, it is prohibitively priced. Some wood framing products have gone up 167% since last August 2021.
Today’s Homeowner Tips
Compare that increase to metal studs. Even though steel prices have increased in price, they are still the better value when it comes to framing a home.
According to statistics, the average cost per square foot of framing materials in steel is $2–$5 per square foot (depending on the gauge). Framing material for wood is averaging $5–$10 per square foot. Labor rates still run the same for both.
When you combine the dollar savings in material costs with the added savings achieved through less time spent in the framing process, using metal studs makes sense.
Get Your Estimate From a Professional Home Builder
Match with an expert to help you with your new home.
The metal framing construction project starts with structural steel detailing and takeoff. It is similar to the wood framing costs takeoff estimation, but instead of lumber quantities, and lumber prices, it’s all about steel.
The importance of this stage is the financial clarity it brings before the project can commence. The quantity takeoff requires the detailing and estimating of the raw materials needed to complete the project. Structural Beam’s estimators will review the plans for the project, the blueprints, and the diagrams provided by the structural steel designers and engineers.
By detailing the plans, our estimation team will establish an accurate takeoff of raw materials, required for the manufacturing and fabrication of all the structural steel members used in steel-framed buildings construction. Apart from raw metal products, needed for fabrication, all other accessories and components are counted in as well, including bolts, nuts, etc. Estimating takeoffs for metal framing calls for experience and knowledge, and that’s what our steel estimators provide, along with impeccable steel estimation service.
For metal stud framing takeoff costs estimation, the process is the same, but instead of calculating hot-rolled steel beams of various sizes and sections, estimators will only have to calculate the quantity and price of cold-formed structural metal studs, non-structural steel studs, and steel tracks, that are the main components of the steel stud framed buildings.
A considerable portion of the overall steel framing cost is the fabrication expenses. It takes many man-hours for our ironworkers to manufacture and fabricate all the structural and non-structural steel members for the future erection. If you are doing the whole project with Structural Beam, you’ll get the benefit of the seamless cooperation of different departments, working together from early on to ensure the successful completion of your construction project.
Want more information on Metal Framing Systems? Feel free to contact us.
Previous: Uses for Metal Mesh Sheets | LSM
If you are interested in sending in a Guest Blogger Submission,welcome to write for us!
All Comments ( 0 )